Machine gate integrated steel gate and machine gate integrated gate series products are commonly used in water supply and drainage engineering, sewage treatment, water conservancy and hydropower engineering

　　The water blocking and sealing equipment is composed of door frame, gate, sealing rubber and adjustable wedge-shaped pressing block. Long service wear of stainless steel gate

　　After that, the sealing surface can be adjusted to ensure normal operation. Steel gate (steel gate) is based on high quality steel plate,

　　The rubber water stop and anti-corrosion methods are used to remove sand and rust on the surface, and the steel gate has reasonable and firm structure, wear resistance and corrosion resistance

　　It is easy to install, adjust, use and maintain.

　　Durability: the residential structure of light steel structure is composed of cold-formed thin-walled steel member system, and the steel frame is made of super anti-corrosion high strength cold-rolled galvanized steel

　　Plate manufacturing increases the service life of light steel components, and the structural life can reach more than 30 years. The machine gate integrated gate skillfully connects the gate with the hoist

　　It is suitable for channel installation without setting the hoist platform. It is easy to install. The small size is cast as a whole, and the larger size is

　　The specifications are assembly type and order type. The gate size, hoist height and hoist model shall be indicated in detail. We will provide complete and detailed safety equipment

　　Assembly drawing. It can open and close both round gate and square gate. The machine gate integrated gate ingeniously connects the gate and the hoist as a whole, which is suitable for the canal

　　It's easy to install, small size adopts integral casting, large size adopts assembly type, order

　　We will provide complete and detailed installation drawings.

　　characteristic:

　　1. The machine brake integrated gate is divided into three types: steel machine brake integrated gate, cast iron machine brake integrated gate and stainless steel machine brake integrated gate

　　2. Integration of machine and gate the gate is skillfully connected with the hoist.

　　3. Suitable for channel installation. No need to set the hoist platform, easy to install.

　　4. Integral casting is adopted for small specifications, and assembly type is adopted for large specifications.

　　5. When ordering, the gate size, hoist height and hoist model shall be indicated in detail. We will provide complete and detailed installation drawings. Two way stop

　　The water is sealed by the combination of double vertical frame and elastic water stop strip, which can bear the water head of 8 meters forward and 4.5 meters reverse, and can also be adjusted according to the specific requirements

　　To make higher head gate.

　　The machine gate integrated gate has complete specifications, from 0.2x0.26.5x6.5m (6.5x6.5m water head height is 6.5m) to produce rectangular cast iron gate; when the gate mouth is > 3M, it is double lifting point gate. The machine gate integrated gate is mainly used for sealing water under positive pressure, and the directional water stop gate can be made according to the needs of users. In the structure, machining hard water seal is used, and rubber water seal is also used for the bottom sealing of larger gate. According to the user's requirements, copper inlaid or stainless steel inlaid water stop can be used. The machine gate integrated gate has a normal water head of 1-6m, and can also bear certain reverse water head. It can be used to manufacture high water head gate according to the requirements of users.